Carpet & Rug Washing Machines come in various sizes and features:
Dirt, dust and impurities are expelled quickly with the in depth effect by the roller-type brushes. Detergent and pressurized water are deployed to surface of the carpet by ‘go & come’ system. In this way, dirt, dust and impurities are expelled completely from the carpet surface. According to carpet size, the brushes pressure is adjusted automatically by the machine. Whether thin pile or thick, you will not be required to make a separate action. ‘Go & come’ system and brushes are sensitive to the pile height of the carpet.
Note: The system will stop automatically if there is no carpet. This feature provides water, electricity and detergent savings.
Machine wash stages respectively: Detergent deployed, pre-wash, main wash, rinse, roll and rinse the back surface and wash.
In the manufacturing of machine parts: the use AISI 304 stainless CrNi ( Chromium ) materials. These metals are resistant to water and chemicals used in normal cleaning. All electrical connections on the machines and motors are accessibly located and encased in the materials used. Thus electrical connections and the motor are protected from the adverse effects of water and moisture. Remote access diagnostic port inside the side panel.
Size of Bed: 14-foot bed width allows for a maximum of 13' 7" wide rug to be cleaned.
Price: $52,850
Contact us for a quote (including shipping)
Dimensions (L x W x H): 189" x 90" x 75"
Weight: 4563 lbs
For washers:
+ Top Cylindrical Brush
+ Bottom Cylindrical Brush
+ Rotary Brushes 4+4=8
+ Fully Automatic with PLC system
+ Remote Access Diagnostic Port
+ Washing Tub Included
+ Centrum Force carries replacement parts in the US in most cases
+ Monday-Friday Centrum Force Service Department Support
Electrical:
+ Minimum 220 volt/3-Phase/80 amps required
+ Pump requires a cord wired to a plug supplied by Ergin to be plugged into the control box to turn the power on and off for high-pressure.
Drainage:
+ Water drains straight from the bottom of the machine
+ Ergin recommends a rectangle drain installed at 3' around the perimeter of the machine. Common drains are 6" trench drain systems.
+ It is possible for a customer to design a tray system to route the water to a desired destination.